DSpace Repository

Browsing Proceedings papers by Title

Browsing Proceedings papers by Title

Sort by: Order: Results:

  • RADCAP: A MOS capacitor simulator for radiation effects 
    ZAMAN, P; PATRIKAR, SJ; GOEL, M; BHARADWAJ, V; DAS, A; SHARMA, DK; VASI, J (NAROSA PUBLISHING HOUSE, 1996)
  • Radiation effects in malignancy - a study using laser doppler flowmetry 
    PUNIYANI, R; KHAN, MM; HUSSAIN, MA (I E E E, 1994)
  • Radiation-assisted interactions between gold and copper across a Nickel barrier 
    BHATTACHARYYA, VP; PRABHAWALKAR, PD (ELSEVIER SCIENCE SA LAUSANNE, 1991)
    Previously we had studied the effect of nitrogen bombardment on the interface of thin electrodeposited films of copper and gold. In practical applications thin films of nickel are used between as barrier layers. Extensive ...
  • Radiation-induced degradation of bipolar transistors 
    TOPKAR, A; MATHEW, T; LAL, R; VASI, J; NANVER, L (SPIE-INT SOC OPTICAL ENGINEERING, 1998)
    The radiation-induced degradation of high frequency npn bipolar transistors with low stress LPCVD silicon nitride as the surface isolation is investigated for the first time. The results are compared with those for devices ...
  • RADSPICE: A circuit simulator to predict the effects of radiation 
    CHUMBER, HK; KALAVADE, PP; PARIKH, CD; DAS, A (NAROSA PUBLISHING HOUSE, 1996)
  • Raf kinase inhibitor protein: a putative molecular target in prostate cancer 
    SINGH, SHAILZA; MALIK, BK; SHARMA, DK (IEEE, 2004)
    Each year in the United States, prostate cancer kills over 40,000 men, and over 200,000 new cases are diagnosed, making it the second most common cancer and the second most common cause of cancer deaths among males. ...
  • Raman scattering investigations of semiconducting diamond-like carbon thin films and fibers obtained from camphor 
    RZEPKA, E; LUSSON, A; PONOMAREV, EA; MUKHOPADHYAY, K; SHARON, M; LEVY-CLEMENT, C (PERGAMON-ELSEVIER SCIENCE LTD, 1998)
    Semiconducting carbon-based thin films obtained from camphor soot were studied by micro-Raman spectroscopy with a laser wavelength of 632.8 nm. Different spectral contributions were identified between 1000 and 1650 cm(-1) ...
  • Range-error based three-dimensional salvo guidance against stationary targets 
    NANAVATI R.V.; KUMAR S.R.; MAITY A. (American Institute of Aeronautics and Astronautics Inc, AIAA, 2021)
    In this paper, nonlinear guidance strategies, for multiple interceptors, are proposed to achieve salvo against a stationary target. The proposed guidance strategy utilizes an impact time estimate based on proportional ...
  • Ranking based uncertainty quantification for a multifidelity design approach 
    UMAKANT, J; SUDHAKAR, K; MUJUMDAR, PM; RAO, CR (AMER INST AERONAUT ASTRONAUT, 2007)
    Computer simulation based design processes are being extensively used in complex systems like scramjet powered hypersonic vehicles. The computational demands associated with the high-fidelity analysis tools for predicting ...
  • A rapid handoff protocol for mobility in bluetooth public access networks 
    KANSAL, A; DESAI, UB (INT COUNCIL COMPUTER COMMUNICATION, 2002)
    The availability of low power short range wireless technologies, such as Bluetooth, is enabling compact handheld devices to be connected to information networks,for mobile and ubiquitous computing. The usage model assumed ...
  • Rapid LUT Modelling Technique for GaN HEMT Based MMIC Technology 
    CHANDRA P.; SAINI R.; JHA J.; YADAV Y.; MUKHERJEE S.; GANDHI R.; LAHA R.; PEDAPATI N.; BALASEKHAR D.; DAS A.; SAHA D.; GANGULY S. (Institute of Electrical and Electronics Engineers Inc., 2021)
    High frequency power applications such as radar, terrestrial and space communications, and signal jamming are increasingly adopting gan devices. Rf gan market growth is driven significantly by 5g today. This paper describes ...
  • Rapid prototyping of PM components for automotive industry 
    RAMA, MTR; RAMAKRISHNAN, P; BAPAT, VP (SCIENCE PUBLISHERS INC, 2002)
    The need for production of complex components with little or no machining by powder metallurgy (PM) techniques has brought in injection moulding as one of the most popular processing techniques. The tools and dies required ...
  • Rapid solidification of cobalt-titanium alloys induced by nanosecond laser-pulses 
    VITTA, S; GREER, AL; SOMEKH, RE (ELSEVIER SCIENCE SA LAUSANNE, 1994)
    Phase formation is studied in thin films of Co-Ti alloys, both as sputtered and after quenching following melting by a 5 ns laser pulse, The composition ranges for glass formation are established, and the significance of ...
  • Rare earth oxides in microelectronics 
    KAKUSHIMA, K; TSUTSUI, K; OHMI, SI; AHMET, P; RAO, VR; IWAI, H (SPRINGER-VERLAG BERLIN, 2007)
    A feasibility study of rare earth oxides for replacing SiO2 gate oxide for CMOS integrated circuits has been conducted. Rare earth oxides have relatively higher dielectric constants and are suitable as gate dielectrics. ...
  • Rate adaptation games in wireless LANs : Nash equilibrium and price of anarchy 
    CHAPORKAR, P; PROUTIERE, A; RADUNOVIC, B (IEEE, 2010)
    In Wireless LANs, users may adapt their transmission rates depending on the radio conditions of their links so as to maximize their throughput. Recently, there has been a significant research effort in developing distributed ...
  • Rate constants for the removal of pollutants in wetlands: A mini review 
    SUTAR, RS; LEKSHMI, B; KAMBLE, KA; ASOLEKAR, SR (DESALINATION PUBL, 2018)
    The constructed wetlands (CWs) possess tremendous significant potential for the treatment, reuse and recycle of wastewater. As compared with conventional wastewater treatment methods, CW has great significance in terms of ...
  • Rate constrained discrete-time maximum principle 
    GANGULY S.; DAS S.; CHATTERJEE D.; BANAVAR R. (Elsevier B.V., 2021)
    Actuators in real-world systems operate under limited bandwidth and saturation constraints. Mathematically, these limitations manifest as certain types of constraints being imposed on the sequence of control action. While ...
  • Rationalized 3-instruction machine 
    CHITNIS, SV; SATPATHY, M; OBEROI, S (ASSOC COMPUTING MACHINERY, 1995)
    The declarative nature of functional programming languages causes many difficulties in their efficient implementation on conventional machines. The problem is much harder when the language has non-strict (lazy) semantics. ...
  • Re-design and Ergonomic Assessment of a Handcrafted Kalash Polishing Equipment 
    MALLAMPALLI K.C.; PAL S. (Springer Science and Business Media Deutschland GmbH, 2022)
    In india, the handicraft industry is one of the important and export-oriented industries. In this industry, around six million handicraft workers were engaged, and their activities were mostly manual in nature. Polishing ...
  • Reach Optimized Architecture for Multi-rate Transport System (ROAMTS) : one size does not fit all 
    GUMASTE, A; GHANI, N (IEEE, 2009)
    We propose a new system for high-speed optical communication in the metro area. The system is based on the concept one-size does not fit all philosophy for optical networks. Architecture and performance issues are discussed. ...

Search DSpace


Advanced Search

Browse

My Account