DSpace at IIT Bombay >
IITB Publications >
Please use this identifier to cite or link to this item:
|Title: ||Cyclic stress-strain characteristics of two microalloyed steels|
|Authors: ||GUPTA, C|
|Keywords: ||low-carbon steel|
|Issue Date: ||2009|
|Publisher: ||MANEY PUBLISHING|
|Citation: ||MATERIALS SCIENCE AND TECHNOLOGY, 25(6), 760-769|
|Abstract: ||The cyclic stress-strain behaviour of two microalloyed steels with different microstructures has been characterised at room temperature under strain controlled low cycle fatigue. The cyclic stress-strain curve in the double logarithmic plot shows a linear relation for both steels. A transition of the cyclic stress-strain curve from softening to hardening with increasing strain amplitude has been observed with respect to the corresponding tensile curve. The strain amplitude for the onset of cyclic softening to hardening transition has been found to be dependent on grain size. The strain lifetime behaviour, estimated from modified universal slopes equation, shows similar trends as Nb or V bearing microalloyed steels. The cyclic characteristics of the two microalloyed steels have been compared with corresponding predeformed state carried out under stress controlled conditions. While, cyclic saturation was observed in case where the extent of predeformation was within the Luders strain, cyclic softening occurred when it exceeded the Luders strain. It has been attempted to provide a mechanistic understanding of the differences in the cyclic behaviour of the two steels owing to the microstructure and predeformation.|
|Appears in Collections:||Article|
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.