DSpace at IIT Bombay >
IITB Publications >
Please use this identifier to cite or link to this item:
|Title: ||Asymmetry during load-loss measurement of three-phase three-limb transformers|
|Authors: ||ESCARELA-PEREZ, R|
|Keywords: ||eddy-current problems|
|Issue Date: ||2007|
|Publisher: ||IEEE-INST ELECTRICAL ELECTRONICS ENGINEERS INC|
|Citation: ||IEEE TRANSACTIONS ON POWER DELIVERY, 22(3), 1566-1574|
|Abstract: ||When the load-loss measurement test is conducted on three-phase transformers, an appreciable asymmetry is observed among the power readings of the three phases. This asymmetry is the result of two causes, viz. asymmetrical disposition of phases in space with respect to each other and unequal stray losses produced by phases. The disposition of phases leads to asymmetrical mutual impedances between phases and this is the principal contributor to the phenomenon. Another factor that may have an important contribution to the phenomenon is the deviation of the phase angle difference between the voltages of the three phase source (used during the test) from 120 degrees. The causes are analyzed using a detailed three-dimensional (3-D) finite-element (FE) simulation of a 31.5 MVA, 132/33 kV transformer. In addition, a six-port network impedance model is deduced from open-circuit 3-D FE simulations. The impedance model is able to reproduce any condition of the transformer (e.g., open-circuit, short-circuit or on-load conditions) since it captures all the transformer electromagnetic phenomena. The six-port network results are discussed in order to elaborately clarify the intriguing problem of asymmetrical load-loss distribution, which is important for both transformer manufacturers and users. The results are further explained through sequence components; of currents.|
|Appears in Collections:||Article|
Files in This Item:
There are no files associated with this item.
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.