DSpace
 

DSpace at IIT Bombay >
IITB Publications >
Article >

Please use this identifier to cite or link to this item: http://dspace.library.iitb.ac.in/jspui/handle/10054/7276

Title: Assessment of influence of some process parameters on sheet metal blanking
Authors: MAITI, SK
AMBEKAR, AA
SINGH, UP
DATE, PP
NARASIMHAN, K
Keywords: fem simulations
Issue Date: 2000
Publisher: ELSEVIER SCIENCE SA
Citation: JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, 102(1-3), 249-256
Abstract: The blanking of thin sheet (0.1-1 mm) of mild steel has been analysed using an elastic-plastic finite element method based on the incremental theory of plasticity. The blank diameters are considered in the range 1-4 mm. The study has helped to evaluate the influence of tool clearance, friction, sheet thickness, punch/die size and blanking layout on the sheet deformation. The punch load variation with tool travel and stress distribution in the sheet have been obtained. The results indicate that a reduction in the tool clearance increases the blanking load. The blanking load increases with an increase in the coefficient of friction. These observations are very similar to the case of blanking of component of large size. Further, these effects are very similar in the case of both single and double blanking. An interblanking site distance of about twice the sheet thickness is good to reduce the thinning of sheet at the intermediate regions between the two blanking sites. For a particular sheet thickness, the blanking load requirement reduces as the blank diameter increases. (C) 2000 Elsevier Science S.A. .
URI: http://dx.doi.org/10.1016/S0924-0136(99)00486-0
http://dspace.library.iitb.ac.in/xmlui/handle/10054/7276
http://hdl.handle.net/10054/7276
ISSN: 0924-0136
Appears in Collections:Article

Files in This Item:

There are no files associated with this item.

View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback