DSpace
 

DSpace at IIT Bombay >
IITB Publications >
Article >

Please use this identifier to cite or link to this item: http://dspace.library.iitb.ac.in/jspui/handle/10054/1205

Title: Earthquake response of isolated elevated liquid storage steel tanks
Authors: SHRIMALI, MK
JANGID, RS
Keywords: bearings (structural)
aspect ratio
earthquake effects
liquid sloshing
seismology
Issue Date: 2003
Publisher: Elsevier
Citation: Journal of Constructional Steel Research 59(10), 1267-1288
Abstract: Earthquake response of elevated liquid storage steel tanks isolated by the linear elastomeric bearings is investigated under real earthquake ground motion. Two types of isolated tank models are considered in which the bearings are placed at the base and top of the steel tower structure. The continuous liquid mass of the tank is modelled as lumped masses known as sloshing mass, impulsive mass and rigid mass. The corresponding stiffness constants associated with these lumped masses have been worked out depending upon the properties of the tank wall and liquid mass. The mass of steel tower structure is lumped equally at top and bottom. Since the damping matrix of the isolated tank system is non-classical in nature, the seismic response is obtained by the Newmark’s step-by-step method. The response of two types of tanks, namely slender and broad tanks, is obtained and a parametric study is carried out to study the effects of important system parameters on the effectiveness of seismic isolation. The various important parameters considered are the tank aspect ratio, the time period of tower structure, damping and the time period of isolation system. It has been shown that the earthquake response of the isolated tank is significantly reduced. Further, it is also observed that the isolation is more effective for the tank with stiff steel tower structure in comparison to flexible towers. In addition, a simplified analysis is also presented to evaluate the response of the elevated steel tanks using two-degrees-of-freedom model and two single-degree-of-freedom models. It is observed that the proposed analysis predicts the seismic response of elevated steel tanks accurately with significantly less computational efforts.
URI: http://dx.doi.org/10.1016/S0143-974X(03)00066-X
http://hdl.handle.net/10054/1205
http://dspace.library.iitb.ac.in/xmlui/handle/10054/1205
ISSN: 0143-974X
Appears in Collections:Article

Files in This Item:

File Description SizeFormat
12Jangid444230.pdf347.07 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback