DSpace
 

DSpace at IIT Bombay >
IITB Publications >
Article >

Please use this identifier to cite or link to this item: http://dspace.library.iitb.ac.in/jspui/handle/10054/1192

Title: An empirical study on the generation of an edge radius in abrasive jet external deburring (AJED)
Authors: BALASUBRAMANIAM, R
KRISHNAN, J
RAMAKRISHNAN, N
Keywords: abrasives
jets
machining
nozzles
stainless steel
Issue Date: 2000
Publisher: Elsevier
Citation: Journal of Materials Processing Technology 99(1-3), 49-53
Abstract: One attractive feature of external deburring with an abrasive jet is the ability to generate an edge radius at the deburred edges. The effects of various input parameters, viz. abrasive grit size, mixing ratio, nozzle diameter, stand-off-distance and the thickness of the specimen, on the response parameters were investigated on plaster-of-paris specimens by full factorial design. In addition to the extent of the edge radius generated, the variation in the diameters at the entry and exit side of the specimen were also investigated. The extent of the edge radius generated was affected significantly by the parameter stand-off-distance and the variations in the diameters were affected by the nozzle diameter. The results of the edge radius generation were applied to AISI 304 stainless steel burr specimens and verified. The details of the investigations carried out are presented in this paper.
URI: http://dx.doi.org/10.1016/S0924-0136(99)00350-7
http://hdl.handle.net/10054/1192
http://dspace.library.iitb.ac.in/xmlui/handle/10054/1192
ISSN: 0924-0136
Appears in Collections:Article

Files in This Item:

File Description SizeFormat
5256-3.pdf122.02 kBAdobe PDFView/Open
View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback