Please use this identifier to cite or link to this item: http://dspace.library.iitb.ac.in/xmlui/handle/10054/1191
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBALASUBRAMANIAM, Ren_US
dc.contributor.authorKRISHNAN, Jen_US
dc.contributor.authorRAMAKRISHNAN, Nen_US
dc.date.accessioned2009-04-21T14:10:40Zen_US
dc.date.accessioned2011-11-25T21:08:37Zen_US
dc.date.accessioned2011-12-26T13:08:49Zen_US
dc.date.accessioned2011-12-27T05:34:11Z-
dc.date.available2009-04-21T14:10:40Zen_US
dc.date.available2011-11-25T21:08:37Zen_US
dc.date.available2011-12-26T13:08:49Zen_US
dc.date.available2011-12-27T05:34:11Z-
dc.date.issued1999en_US
dc.identifier.citationJournal of Materials Processing Technology 91(1-3), 178-182en_US
dc.identifier.issn0924-0136en_US
dc.identifier.urihttp://dx.doi.org/10.1016/S0924-0136(98)00386-0en_US
dc.identifier.urihttp://hdl.handle.net/10054/1191en_US
dc.identifier.urihttp://dspace.library.iitb.ac.in/xmlui/handle/10054/1191en_US
dc.description.abstractDeburring of cross-drilled holes by secondary erosion of an abrasive jet was carried out and the parameters were identified. The detailed studies carried out on the parameters indicate that the parameter stand-off distance, burr root-to-stopper distance, abrasive grit size and mixing ratio significantly affect the deburring process. A burr model for 90° cross-drilled holes is also presented in this paper.en_US
dc.language.isoenen_US
dc.publisherElsevieren_US
dc.subjectAbrasive Cuttingen_US
dc.subjectBrittlenessen_US
dc.subjectAbrasivesen_US
dc.subjectWear Of Materialsen_US
dc.titleAn experimental study on the abrasive jet deburring of cross-drilled holesen_US
dc.typeArticleen_US
dc.description.copyright© Elsevieren_US
Appears in Collections:Article

Files in This Item:
File Description SizeFormat 
5256-4.pdf118.66 kBAdobe PDFThumbnail
View/Open


Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.