DSpace
 

DSpace at IIT Bombay >
IITB Publications >
Proceedings papers >

Please use this identifier to cite or link to this item: http://dspace.library.iitb.ac.in/jspui/handle/100/1240

Title: Tensile bond strength of an adhesive resin cement to different alloys having various surface treatments
Authors: ABREU, A
LOZA, MA
ELIAS, A
MUKHOPADHYAY, S
LOONEY, S
RUEGGEBERG, FA
Keywords: base-metal alloys
luting cements
crown preparations
composite resin
dental alloys
high-noble
retention
copings
primers
enamel
Issue Date: 2009
Publisher: MOSBY-ELSEVIER
Citation: JOURNAL OF PROSTHETIC DENTISTRY,101(2)107-118
Abstract: Statement of problem. The ability of a resin cement to bond to a restorative alloy is critical for maximal crown retention to nonideal preparations. Surface treatment and metal type may have an important role in optimizing resin-tometal strength. Purpose. The purpose of this study was to examine the effect of surface pretreatment on the tensile strength of base and noble metals bonded using a conventional resin cement. Material and methods. Cylindrical plastic rods (9.5 mm in diameter), cast in base (Rexillium NBF) or noble metal (IPS d.SIGN 53), were divided into rods 10 mm in length (n=10-12). Specimens were heated in a porcelain furnace to create an oxide layer. Test specimens were further subjected to airborne-particle abrasion (50-mu m Al(2)O(3) particles) alone or with the application of a metal primer (Alloy Primer). Similarly treated rod ends were joined using resin cement (RelyX ARC), thermocycled (x500, 5 degrees-55 degrees C) and stored (24 hours, 37 degrees C) before debonding using a universal testing machine. Debond strength and failure site were recorded. Rank-based ANOVA for unbalanced designs was used to test for significant interaction (alpha=.050). Each pair of treatments was compared separately for each metal (Bonferroni-adjusted significance level of .0083, overall error rate for comparisons, .05). The 2 metals were compared separately for each of the 3 treatments using an adjusted significance level of .017, maintaining an overall error rate of .05. A multinomial logit model was used to describe the effect of metal type and surface pretreatment on failure site location (alpha=.05). Results. Interaction between metal type and surface pretreatment was significant for stress values (P=.019). Metal type did not significantly affect tensile bond strength for any of the compared surface pretreatments. Metal primer significantly improved tensile bond strength for each metal type. Most failures tended to occur as either adhesive or mixed in nature. Conclusions. Metal primer application significantly enhanced tensile bond strength to base and noble metal. No significant differences in tensile strength were found between alloys. Differences in failure site incidence were found to be related to metal type and surface pretreatment. (J Prosthet Dent 2009;101:107-118)
URI: http://dspace.library.iitb.ac.in/xmlui/handle/10054/14428
http://hdl.handle.net/100/1240
ISSN: 0022-3913
Appears in Collections:Proceedings papers

Files in This Item:

There are no files associated with this item.

View Statistics

Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.

 

Valid XHTML 1.0! DSpace Software Copyright © 2002-2010  Duraspace - Feedback